Friday, August 26, 2011
Thursday, August 18, 2011
BW1000A Flojet Bottled Water Dispensing System
!9# BW1000A Flojet Bottled Water Dispensing System
Post Date : Aug 18, 2011 14:02:30 | Usually ships in 1-2 business days
The FloJet Model BW1000A Bottled Water Dispensing System is designed to pump water from commercially available 3, 5, or 6 gallon water bottles. The system delivers the bottled water under pressure to a sink mounted drinking water faucet, or to the water inlet of a refrigerator, icemaker, coffee brewer, or Jupiter Water Ionizer. The suction wand, when inserted into the water bottle, activates the float switch on the pump. This float switch also shuts off the system when the bottle is empty. The wand has a built in back-flow valve to prevent water from flowing back into the bottle. Universal seal cap most containers - Fits 3, 5, and 6 gallon plastic water bottles Suction wand and hose assembly Float switch for automatic shut-off when bottle is empty. Built-in check valve to prevent back flow Pump module with On/Off switch Installation and maintenance instructions Compact size for easy traveling
- Maximum Flow 1.0 Gallons Per Minute
- Operating pressure to 30 PSI ...Maximum Pressure - 40 PSI
- 6' cord AC power cord ... 20' ¼" discharge tube
- Voltage 120 Volts, 50/60 Hz. 0.5 amps ... UL and CUL listed
- Manufacturers Limited 1 Year Warranty
Wednesday, August 10, 2011
Friday, August 5, 2011
TERAPUMP (TM) TRNSC500 Drinking Water Bottle NON-SPILL Caps - 500ct
!9# TERAPUMP (TM) TRNSC500 Drinking Water Bottle NON-SPILL Caps - 500ct
Post Date : Aug 06, 2011 06:47:50 | Usually ships in 1-2 business days
INSTRUCTIONS:If there is a cap currently on your bottle, remove it, snap our NON SPILL cap onto the top of the bottle. Peel the label off of the top. Invert the bottle into place on the cooler and the prong will puncture the middle of the cap.This is a NON SPILL cap for 2,3,5 and 6 Gallon bottles with 55mm crown top bottles. This cap is not designed for screw top bottles. This cap can also be used for transporting bottles as long as the top hasn't been punctured.This cap is designed for water coolers with a puncturing prong or spike. The cap will fit onto any 55mm 2,3,5, and 6 gallon water bottles. Including bottles from the following companies: Arrowhead, Sparkletts, Culligan, Sierra Springs, Polar, Crystal Springs, Ice Mountain, Alhambra, Poland Springs, and so on, but not limited to those companies, they can also be used on bottles bought from department stores.
More Specification..!!